Novel branched sulfonated polyimide membrane with remarkable vanadium permeability resistance and proton selectivity for vanadium redox flow battery application

A series of novel branched sulfonated polyimide (bSPI-x) membranes with 8% branched degree are developed for application in vanadium redox flow battery (VRFB). The sulfonation degrees of bSPI-x membranes are precisely regulated for obtaining excellent comprehensive performance. Among all bSPI-x membranes, the bSPI-50 membrane shows strong vanadium permeability resistance, which is as 8 times as that of commercial Nafion 212 membrane. At the same time, the bSPI-50 membrane has remarkable proton selectivity, which is four times as high as that of Nafion 212 membrane. The bSPI-50 membrane possesses slower self-discharge speed than Nafion 212 membrane. Furthermore, the bSPI-50 membrane achieves stable VRFB efficiencies during 200-time charge-discharge cycles at 120–180 mA cm^?2. Simultaneously, the bSPI-50 membrane exhibits excellent capacity retention compared with Nafion 212 membrane. All results imply that the bSPI-50 membrane possesses good application prospect as a promising alternative separator of VRFB.     

PBAT‒PLA膜袋受控需氧堆肥条件下的降解研究

目的 通过对广泛使用的PBAT–PLA生物降解膜袋在受控需氧堆肥条件下的降解机制研究，为生物降解塑料的大规模推广提供重要理论基础。方法 根据GB/T 19277.1—2011，在(58±2)℃需氧条件下，对PBAT–PLA膜袋进行为期160 d的生物降解测试(即工业堆肥)，并以常见的可降解材料微晶纤维素作为参比样品。对降解前后的材料进行红外、扫描电镜、能谱分析，并结合其所在堆肥样本的脂肪酶活性，从多角度探寻降解机制。结果 PBAT–PLA膜袋与微晶纤维素所在的堆肥脂肪酶活性都达到空白堆肥的3倍以上。红外显示由微晶纤维素水分子吸附、糖环打开、基团氧化形成的吸收峰加强，PBAT–PLA膜袋中的酯键峰明显减弱;扫描电镜发现降解的PBAT–PLA膜袋表面覆盖了微生物膜;能谱分析发现，碳元素大幅减少，氧元素增加。结论 微生物在PBAT–PLA膜袋表面生长形成生物膜，分泌大量脂肪酶，水解PBAT–PLA的酯键，使聚合物降解为不同链长的中间体或小分子，同时伴随着氧化，随后被作为碳源，在相关微生物体内被代谢利用，形成最终产物。     

稳产国Ⅵ柴油并兼产喷气燃料技术方案的工业应用

介绍了浙江石油化工有限公司新建的3 Mt/a柴油加氢精制装置，其配套使用中国石化石油化工科学研究院有限公司开发的催化剂级配技术，并实施了可根据原料供应及市场产品需求情况灵活调整切换的2种生产技术方案。1 a的安稳生产运行结果表明:该装置以直馏柴油为主原料，通过分馏塔的馏分切割及其侧线抽出，实现了稳产国Ⅵ柴油并兼产喷气燃料技术方案的工业化应用；在实施以兼产喷气燃料为主的生产技术方案时，通过调整常一线柴油的掺炼量，不仅可以生产含硫量小于10.0 μg/g的精制柴油产品，同时兼产所得到的喷气燃料产品含硫量小于0.5 μg/g，赛波特颜色号值大于30；在实施主产精制柴油组分方案时，通过掺炼质量分数为20%~40%的催化柴油，并使所提炼得到的精制柴油组分含硫量小于6.0 μg/g的前提下，这些精制柴油组分产品既可直接作为满足国Ⅵ柴油产品出厂待售，也可作为柴油调和组分储存待用于产品的进一步优化。     

An active balancer with rapid bidirectional charge shuttling and adaptive equalization current control for lithium-ion battery strings

This article proposes an active balancer, which features bidirectional charge shuttling and adaptive equalization current control, to fast counterbalance the state of charge (SOC) of cells in a lithium-ion battery (LIB) string. The power circuit consists of certain bidirectional buck-boost converters to transfer energy among the different cells back and forth. Owing to the characterization of the open-circuit voltage (OCV) vs SOC in LIB being relatively smooth near the SOC middle range, the SOC-inspected balance strategy can achieve more precise and efficient equilibrium than the voltage-based control. Accordingly, a compensated OCV-based SOC estimation is put forward to take into account the discrepancy of SOC estimation. Besides, the varied-duty-cycle (VDC) and curve-fitting modulation (CFM) methods are devised herein to tackle the problems of slow equalization rate and low balance efficacy, which arise from the diminution in balancing current as the SOC difference between the cells decreases in the later duration of equalization especially. The proposed strategies have taken the battery nonlinear characteristic and circuit parameter nonideality into account and can adaptively modulate the duty cycle with the SOC difference to keep balancing current constant throughout the balancing cycle. Simulated and experimental results are given to demonstrate the feasibility and effectiveness of the same prototype constructed. Compared with the fixed duty cycle and the VDC methods, the proposed CFM has the best balancing efficiency of 81.4%, and the balance time is shortened by 27.1% and 18.6%, respectively.     

Improving accuracy of automatic optical inspection with machine learning

Electronic devices require the printed circuit board(PCB)to support the whole structure,but the assembly of PCBs suffers from welding problem of the electronic components such as surface mounted devices(SMDs)resistors.The automated optical inspection(AOI)machine,widely used in industrial production,can take the image of PCBs and examine the welding issue.However,the AOI machine could commit false negative errors and dedicated technicians have to be employed to pick out those misjudged PCBs.This paper proposes a machine learning based method to improve the accuracy of AOI.In particular,we propose an adjacent pixel RGB value based method to pre-process the image from the AOI machine and build a customized deep learning model to classify the image.We present a practical scheme including two machine learning procedures to mitigate AOI errors.We conduct experiments with the real dataset from a production line for three months,the experimental results show that our method can reduce the rate of misjudgment from 0.3%–0.5%to 0.02%–0.03%,which is meaningful for thousands of PCBs each containing thousands of electronic components in practice.     

MnS掺杂多孔碳复合材料的制备及电化学性能（两张发票1000+2500）

褐煤作为低级煤资源利用率不高，但褐煤中具有腐植酸成分，将褐煤中提取的腐植酸作为化肥原料，提取后剩余残渣作为碳源，与MnS纳米粒子制备了MnS@C复合材料。采用XRD、拉曼光谱、XPS、N2吸附-脱附、SEM和TEM对样品进行了表征。将该复合材料应用于锂离子电池负极材料，对其电化学性能进行了测试。结果表明，MnS@C复合材料的比表面积和孔容分别为117.19m2/g和0.044mL/g，该电极在0.1 A/g电流密度条件下循环200次后比容量高达830 mA‧h/g，且电极容量保持率为99%左右。在0.2、0.4、0.8、1.0、1.2和1.6 A/g电流密度下比容量分别为644、522、427、399、373和348mAh/g，展现出良好的倍率性能。MnS@C复合材料优异的电化学性能得益于碳基体的存在，不仅可以缓解MnS纳米粒子在嵌锂/脱锂过程中的体积膨胀，而且展示了锂离子电池高性能的巨大潜力，为褐煤的高值化利用作出巨大贡献。     

Sea urchin-like LiAlO2@NiCoO2 hybrid composites with core-shell structure as high-performance Li storage materials

Sea urchin-like LiAlO₂@NiCoO₂ hybrid composites with core-shell structure assembled with nanoneedles have been successfully fabricated through a facile hydrothermal route followed by a calcination procedure in N₂ for the first time. The sea urchin-like architecture with large accessible surface can offer numerous active sites for redox reaction. The synergy of two advantages has dramatically improved the electrochemical behavior in terms of specific capacity, cycle performance and rate capability, especially at high current densities. The LiAlO₂(5.0 wt%)@NiCoO₂ displays charge capacities are 1309.0 and 933.6 mAh g^?1 at 0.5 and 1A g^?1, respectively, after 400 cycles. However, the charge capacities of bare NiCoO₂ are only 562.9 and 476.7 mAh g^?1 at corresponding rates. Especially, LiAlO₂(5.0 wt%)@NiCoO₂ preserves 358.1 mAh g^?1 after 500 cycles at 2A g^?1 with a capacity retention of 74%. The superior electrochemical property is related to the sea urchin-like nature and the ingenious composition design. In addition, the DFT calculation result shows that the formed stable, well-coordinated, and metallic interface between LiAlO₂ and NiCoO₂ are very helpful for reducing the interfacial impedance and beneficial for the improved rate capability of the materials. Therefore, such LiAlO₂@NiCoO₂ composites with unique morphology demonstrate a huge potential as electrode materials for Li-ion batteries.     

四旋翼长续航飞行模式的设计与实现

更长的飞行时间是四旋翼无人机领域研究热点方向之一;在对实际飞行中瞬时消耗电流和电池电压数据的研究中发现,过大姿态角下电池电量消耗显著提升;为了延长飞行时间和提升电池电量使用效率,提出一种长续航飞行模式;在该模式下,基于现有的角速度串级PID姿态控制器,将飞行加速度的控制算法改为飞行速度控制,限制过大姿态角的操作;在无风、微风和强风环境下的飞行实验表明,长续航飞行模式比传统飞行方式飞行时间增加8%~20%;长续航飞行模式可广泛应用于多种无需快速变换飞行路径,但需要更长飞行时间的的应用场景中。     

Boron doping induced electronic reconfiguration of Fe-Nx sites in N-doped carbon matrix for efficient oxygen reduction reaction in both alkaline and acidic media

Developing non-precious metal-based catalysts as the substitution of precious catalysts (Pt/C) in oxygen reduction reaction (ORR) is crucial for energy devices. Herein, a template and organic solvent-free method was adopted to synthesize Fe, B, and N doped nanoflake-like carbon materials (Fe/B/N–C) by pyrolysis of monoclinic ZIF-8 coated with iron precursors and boric acid. Benefiting from introducing B into Fe–N–C, the regulated electron cloud density of Fe-N_x sites enhance the charge transfer and promotes the ORR process. The as-synthesized Fe/B/N–C electrocatalyst shows excellent ORR activity of a half-wave potential (0.90 V vs 0.87 V of Pt/C), together with superior long-term stability (95.5% current density retention after 27 h) in alkaline media and is even comparable to the commercial Pt/C catalyst (with a half-wave potential of 0.74 V vs 0.82 V of Pt/C) in an acidic electrolyte. A Zn-air battery assembled with Fe/B/N–C as ORR catalyst delivers a higher open-circuit potential (1.47 V), specific capacity (759.9 mA h g^?1_Zn at 10 mA cm^?2), peak power density (62 mW cm^?2), as well as excellent durability (5 mA cm^?2 for more than 160 h) compared to those with commercial Pt/C. This work provides an effective strategy to construct B doped Fe–N–C materials as nonprecious ORR catalyst. Theoretical calculations indicate that introduction of B could induce Fe-N_x species electronic configuration and is favorable for activation of OH1 intermediates to promote ORR process.     

Hydrothermal synthesis of α-SnWO4: Application to lithium-ion battery and photocatalytic activity

The high capacity anode material is required to replace the most commonly used anode - graphite to keep up the global demand to achieve the goal. Multi-metal oxide has gained keen attention for its higher theoretical capacity and relatively stable than a single metal oxide. α-SnWO₄ has a theoretical capacity of 850 mAh g^?1 which is greater than graphite (372 mAh g^?1). α-SnWO₄ has been synthesized through low-temperature hydrothermal method using tin chloride and sodium tungstate as a precursor in acidic medium (succinic acid) at 200 °C for 12 h. The obtained product has been characterized using various analytical tools such as XRD, FT-IR, UV-DRS, BET, PL, SEM, and HR-TEM. XRD analysis shows the orthorhombic phase with a crystallite size of ~25 nm α-SnWO₄has been examined as an electrode material for Li-ion battery (LIB) and displays an initial discharge capacity of 985 mAh g^?1. Columbic efficiency close to 100% has been observed for 100 cycles. The stability of the electrode material was studied at different C-rates. Band-gap calculated using UV-DRS (Eg = 1.9 eV) shows that α-SnWO₄ is a good candidate for photocatalytic degradation. Results of the photocatalytic experiment using methylene blue (MB) as a model pollutant in an aqueous medium shows good results. The above applications show that α-SnWO₄ is multifunctional materials for diverse applications.